Perle Systems RPS1630 Instrukcja Użytkownika Pobierz pdf (Strona 23)

4-3

Installation

4.4. Connecting the Network Cable

The Network Port is an RJ45 Ethernet jack, for connection to a TCP/IP

network. Connect your 10Base-T cable to the Network Port. Note that the

RPS includes a default IP address (192.168.168.168) and a default subnet mask

(255.255.255.0.) When installing the RPS in a working network environment,

it is recommended to deﬁne network parameters as described in Section 5.3.4.

Note: The RPS features a 10Base-T Interface. When connecting

to a 100Base-T interface, most router switches will autosense

to determine if the device is 100Base-T or 10Base-T, and then

conﬁgure the network interface accordingly. If your router switch

does not autosense, the network interface port must be manually set

to 10Base-T.

This completes the RPS installation instructions. Please proceed to the next

Section for instructions regarding unit conﬁguration.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 71 72

Brak uwag

Perle Systems RPS1630 Instrukcja Użytkownika Strona 23